9 research outputs found
Recommended from our members
Electromagnetic Field Interaction Between Overhead High Voltage Power Transmission Line and Buried Utility Pipeline.
yesThis work presents the development of a new approach of modelling the source excitation and the penetration of structures by continuous propagating electromagnetic (EM) plane waves. The technique incorporates the solution of time-dependent Maxwell¿s equations and the initial value problem as the structures are illuminated by the plane waves. The propagation of waves from source excitation is simulated by solving a finite-difference Maxwell's equation in the time domain. Subgridding method is used to condense the lattice at the point of interest locally for observing field distribution in high resolution. The computational burden due to huge number of time steps has been eased by employing quasi-static approach. An example of induced EM fields near an underground pipeline runs parallel to a 132 kV overhead power transmission line (OHTL) has been presented which paves the way in the development of new approach of EM fields interaction modelling.MSCR
Recommended from our members
Horn Antennas Loaded with Metamaterial for UWB Applications
YesIn this paper, a conical horn antenna has been designed for Ultra-Wideband ap-plications by loading its section with a metamaterial. The work aims first to compare results obtained by the wavelet-moment method to a simulation performed using HFSS. Secondly the conical horn is loaded with a very thin layer of metamaterial to enhance the radiation pattern and the bandwidth performance of the conical horn antenna and reduce the size of the antenna. The operating bandwidth of the proposed antenna is in the range of 10{13 GHz. The results obtained from HFSS and moment method are in good agreement.Electronics and Telecommunication
Compact Microstrip Antenna Design for Microwave Imaging
YesAn ultra-wideband microstrip antenna design is
considered with respect to applications in breast cancer
detection. The underlying design concept is based on ground
penetrating radar (GPR). Simulated and measured prototype
performance show excellent performance in the input impedance
and radiation pattern over the target range from 4 GHz to 8
GHz. The 4 GHz to 8GHz frequency band for microwave
imaging perform better in comparison with other microwave
frequencies. The antenna also shows a reasonable uniform
radiation performance in the broadside direction which
contributes to the reduction of clutter levels, thus aiding the reconstruction quality of the final image
Recommended from our members
Microstrip Antenna for Microwave Imaging Application
yesA compact microstrip antenna design to be used in breast cancer detection is presented. The antenna consists of a radiating patch mounted on two vertical plates, fed by coaxial cable. A study is carried out on different parameters of the antenna. Simulation results show that the antenna possesses a wide bandwidth and this is confirmed experimentally. In experiments, a homogeneous dielectric box, having similar properties to human tissue is used to study the interaction of the antenna with tissue. Even without added matching medium or lumped loads there is good matching when the antenna is in contact with the tissue. Finally a two-element antenna array is investigated numerically, with promising results.MSCR
Recommended from our members
The Compact Design of Dual-band and Wideband Planar Inverted F-L-antennas for WLAN and UWB Applications
yesTwo miniature low profile PIFLA antennas with a compact volume size of 30mm × 15mm × 8mm has presented in this paper. By applying the magnetic wall concept a reduced size dual-band and a wideband half PIFLAs for WLAN (2.4GHz/5.2GHz) and UWB applications are achieved. The dual-band antenna shows a relative bandwidth of 12% and 10.2% at ISM2400 and IEEE802.11a frequency bands respectively for input return loss less than 10dB. By carefully tuning the geometry parameters of the dual-band proposed antenna, the two resonant frequencies can be merged to form a wide bandwidth characteristic, to cover 3000MHz to 5400 MHz bandwidth (57%) for a similar input return loss that is fully covering the lower band UWB (3.1-4.8GHz) spectrum. The experimental and simulated return losses on a small finite ground plane of size 30mm × 15mm show good agreement. The computed and measured radiation patterns are shown to fully characterize the performance of the proposed two antennas.MSCR
Design of a Planar Inverted F-L Antenna (PIFLA) for Lower-band UWB Applications
YesThis paper examines the case for an ultrawideband
planar inverted-F-L-antenna design intended
for use in the lower sub-band. The antenna construction is
based on the conventional inverted F, and inverted L as
its feed element, and parasitic element, respectively. The
optimized antenna size is 30×15×4mm3. The prototype
antenna has a good return loss of -10 dB, and a 66.6%
impedance bandwidth (2.8 GHz ¿ 5.6 GHz), the gain
varies between 3.1 dBi and 4.5 dBi
Recommended from our members
Frequency Tuned Planar Inverted F Antenna with L Shaped Slit Design for Wide Frequency Range.
yesA frequency tuned antenna has been designed to meet the coverage requirements of the DCS, PCS, UMTS and WLAN bands. The antenna consists of a main patch, and a planar inverted L (PIL) slot. The radiator patch is fed, and shorted, using simple feed lines with broadband characteristics. The handset represents the finite ground plane, and a varactor diode is mounted across the middle of the slot for tuning purposes. Initial tuning was obtained by placing lumped capacitors, instead of the varactor, over the radiator. Good agreement is obtained between the predicted and measured input return loss, gain and radiation pattern over the tuned frequency range.MSCR
Recommended from our members
Modelling and design of compact wideband and ultra-wideband antennas for wireless communications. Simulation and measurement of planer inverted F antennas (PIFAs) for contemporary mobile terminal applications, and investigations of frequency range and radiation performance of UWB antennas with design optimisation using parametric studies.
The rapidly growing demand for UWB as high data rates wireless communications technology, since the Federal Communications Commission (FCC) allocated the bandwidth of UWB from 3.1GHz to 10.6 GHz. Antenna also plays an essential role in UWB system. However, there are some difficulties in designing UWB antenna as compared to narrowband antenna. The primary requirement of UWB antennas is be able to operate over frequencies released by the FCC. Moreover, the satisfaction of radiation properties and good time domain performance over the entire frequency range are also necessary.
In this thesis, designing and analysing printed crescent shape monopole antenna, Planar Inverted F-L Antenna (PIFLA) and Planar Inverted FF Antenna (PIFFA) are focused. A Planar Inverted FF Antenna (PIFFA) can be created to reduce the potential for interference between a UWB system and other communications protocols by using spiral slot.
The antennas exhibits broadside directional pattern. The performances such as return loss, radiation pattern and current distribution of the UWB antennas are extensively investigated and carried out. All the results have been demonstrated using simulation and experimentally whereby all results satisfy the performance under - 10dB point in the bandwidth of UWB.
In addition the miniaturization of MIMO/diversity Planar Inverted-F antenna (PIFA) which is suitable for pattern diversity in UWB applications is presented. This antenna assembly is formed by two identical PIFAs, a T-shaped decoupling structure which connects the two PIFAs and a finite ground plane with a total compact envelope dimension of 50 ¿ 90 ¿ 7.5mm3. The radiation performance of the proposed MIMO antenna was quite encouraging and provided an acceptable agreement between the computed and measured envelope correlation coefficient and channel capacity loss.General Secretariat of Education and Scientific Research Liby
Recommended from our members
A low-profile ultra-wideband modified planar inverted-f antenna
A miniaturized modified planar inverted-F antenna (PIFA) is presented and experimentally studied. This antenna consists of a planar rectangular monopole top-loaded with a rectangular patch attached to two rectangular plates, one shorted to the ground and the other suspended, both placed at the optimum distance on each side of the planar monopole. The fabricated antenna prototype had a measured impedance bandwidth of 125%, covering 3 to 13 GHz for reflection coefficient better than 10 dB. The radiator size was 20x10x7.5mm3, making it electrically smallover most of the band and suitable for incorporation in mobile devices. The radiation patterns and gains of this antenna have been cross-validated numerically and experimentally and confirm that this antenna has adequate characteristics for short range ultra-wideband wireless applications